Do you dislike going back to your lumpy air mattress, after a hole rendered it obsolete? If you’re planning to buy a new one, then hold on to your money first. You don’t have to buy a new one because you can easily repair a punctured air bed and make sure it stays full again.
To help you out, here are ten ways to fix a hole on your air bed.
1. Use a patch kit
You can never go wrong with the classic patch. Most air mattresses are sold with patches, glue, and sandpaper. When using a patch kit, make sure to cover the hole and add another layer to make sure no air escapes.
2. Apply hot glue
If you think a patch kit is awesome, then hot glue will be more efficient. Hot and melted glue is simple to do and can be done within minutes. But you should be careful when applying the glue. Make sure the tip of the gun or that sizzling tip does not touch the mattress, or you may cause another burst.
3. Stitch it up
Some people are getting crafty and creative. When you’re considering this one, you don’t have to use needles to attach a piece of cloth to cover the hole. You can stick a stylish or beautiful piece of cloth as a hole cover and finish the job with hot glue or a DIY patch. It is your choice.
4. Try vinyl adhesive
If you don’t want to use a patch, you can use vinyl adhesive to cover it up. Most of the ways mentioned so far are guaranteed to work. This one is a notch higher.
5. Cover it with duct tape
Using duct tape is also a fast and cheap way to fix a hole. But the tape won’t do the job alone. Make sure you apply epoxy glue or rubber cement on the hole, let it dry, and then patch it with duct tape.
6. Turn the hole into another valve
Some people are actually able to turn the holes into air valves, not to only fix an air bed, but also to make it better. This way, you can inflate and deflate the air bed faster.
7. Stuff the bed
If you want to fix your punctured air bed, sometimes, you don’t need to do anything about the hole at all. Why not stuff the inside of the bed with soft cloth or maybe a bunch of pillow feathers? Just don’t fill it up too much as leaving enough space still gives you that air feel when you slumber.
8. Attach a pacifier
Do you have an old pacifier lying around that your children used to have? If you don’t, why not buy a new one and then stick that pacifier on the air bed hole. Make sure to buy a quality pacifier with a durable material to keep that hole shut.
9. Coat the air mattress.
If you want another way of fixing an air mattress, you can have an outer layer made to keep the air intact. You can use various materials like cloth or vinyl fabric. Make sure to properly size it to fully accommodate your air bed.
Time to buy a new one?
If every method to fix a hole fails, then maybe it is time to buy a new one. Having a new air mattress is not a bad idea as prices have been going down whilst the quality of the product has improved over the years. Only this time, you’ve got to pick one that is a lot better compared to your old air bed that you could no longer repair. You can buy a quality one for a price that is lower than a hundred dollars.
OutbaxCamping to the rescue
If you need to buy a new air bed, OutbaxCamping will hook you up. If you need an airbed, inflatable mattress, or whatever you want to call it, you can buy one for as low as $69. Make sure you get one that has a built-in pillow, pump, heavy-duty repair patch, quality I-beam construction, and comfy flocked sleeping space or surface.
An air bed is not just for home. You can bring it everywhere you want. If you’re going camping, you can fold it up and carry it using a travel bag or container. You can even use it to float on the water. Just make sure you take good care of it and to keep it away from sharp objects to prevent that hole. Check out OutbaxCamping now!